Home > Products > gas furnace igniter

gas furnace igniter Manufacturers

We have quite a few great team customers very good at internet marketing, QC, and dealing with kinds of troublesome trouble while in the output approach for gas furnace igniter,hot surface igniter,gas igniter,furnace igniter,gas stove igniter, Sincerely hope to build long lasting company relationships with you and we're going to do our best company in your case.
gas furnace igniter, Due to our dedication, our products are well known throughout the world and our export volume continuously grows every year. We will continue to strive for excellence by providing high quality products that will exceed the expectation of our customers.

Related Products

Hot Products

  • Gas Oven Igniter

    Gas Oven Igniter

    Welcome to buy our Torbo® gas oven igniter made in China, suitable for wood pellet stoves, wood pellet boilers, wood pellet burners, wood pellet grills, wood pellet furnaces and wood pellet smokers, made of hot-pressed silicon nitrogen chemical.
  • Espar D2 Glow Pin

    Espar D2 Glow Pin

    The Torbo® Espar D2 Glow Pin made in China is suitable for parking heater. For heating, spark ignition sensor vehicle auxiliary heating heating in cold areas, the use of silicon nitride, can quickly make the fuel gasification, ignition, combustion. Therefore, after the engine starts soon, as well as idle stop, the car temperature can rise rapidly.
  • Webasto Thermo 90 Flame Detector

    Webasto Thermo 90 Flame Detector

    Product:The Torbo® Webasto Thermo 90 Flame Detector made in China
    Application:Webasto Thermo 90 Flame Detector 24V
    Model:TB18-30-1
    MPN:82407B/1322410A
    Material:Hot Pressed Silicon Nitride
    Detector dia.:3mm
    Rated Voltage:18V
    Current:1.3-2.2A
    Power:25-44W
  • Diesel Glow Plugs

    Diesel Glow Plugs

    Product:The Torbo® Diesel Glow Plugs made in China
    Model:TB12-42-1
    Rated Voltage:12V
    c6.3333 12B
    assy 3333 12V
  • Wood Pellet Burner Igniter

    Wood Pellet Burner Igniter

    The Torbo® Application:Wood pellet stove,wood pellet boiler,wood pellet burner,wood pellet grill,wood pellet furnace,wood pellet smoker. Wood Pellet Burner Igniter has very long life span,no breakage and no attenuation after 50000cycles of 3minutes on and 3minutes off.
  • Ceramic Low Voltage Glow Plug

    Ceramic Low Voltage Glow Plug

    The Torbo® Ceramic Low Voltage Glow Plug made in China enables the glow plug to reach higher temperatures more quickly for fast engine start-up. A ceramic low voltage glow plug is a specialized heating element used in some diesel engines to aid in cold starting. Glow plugs are important in diesel vehicles, especially in colder climates, where the fuel may not ignite easily due to low temperatures..
  • Related Blog
  • Reviews

  • Application of Diesel Glow Plug

    The Diesel Glow Plug is an electrothermal device used to provide additional combustion assistance to diesel engines during cold starts.

  • what is Furnace Replacement Ignitors?

    Furnace replacement ignitors are components used in heating systems, specifically in furnaces, to ignite the fuel and start the combustion process. When you turn on your furnace, the ignitor generates a spark or heat that ignites the gas or oil fuel, allowing the furnace to produce heat.

  • Why Has Silicon Nitride Substrate Become the Star Material in High-Performance Electronics?

    As high-power and high-frequency electronic devices continue to evolve, Silicon Nitride Substrate stands out for its exceptional thermal conductivity, mechanical strength, and insulating properties. It has become a critical material in fields such as electronic packaging, power modules, and automotive electronics. This article will introduce you to the key advantages, application scenarios, and reasons why silicon nitride substrates are indispensable in high-end manufacturing.

  • How do I know if my hot surface ignitor is bad? How do you test a hot surface ignitor?

    As a hot surface igniter is a resistance (thermal resistance producing heat), the only way to check if an ignitor is bad or broken is to check the resistance value.

  • Silicon Nitride Substrates for Improved Performance in Power Electronics

    Today’s power module designs are primarily based on aluminum oxide (Al2O3) or AlN ceramic, but increasing performance demands are causing designers to consider advanced substrate alternatives. One example is seen in xEV applications where an increase in the chip temperature from 150°C to 200°C reduces switching losses by 10%. Additionally, new packaging technologies like solder and wire-bond-free modules are making the current substrates the weak link.

  • Hot Surface Igniter

    Application:Gas clothes dryer,gas ranges,gas oven,HVAC systems,gas grills,gas furnace,gas stove,gas boiler,gas burner.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept